Danger

EFFECTIVE DATE

2024-03-02

PICTOGRAMS

HMIS

HEALTH

FLAMMABILITY

PHYSICAL HAZARD

PERSONAL PROTECTION

Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves. Body Protection protective clothing Respiratory protection Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.

Northern Michigan University
Local data

SKU #

*This local data is shared by all revisions

DL-Tartaric Acid

Danger 2024-03-02

Hazard Statements

Causes serious eye damage.

Precautionary Statements

Wear eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor.

Manufacturer information

Name

Sigma-Aldrich, Inc.

Phone

+1 314 771-5765

Address

3050 SPRUCE ST
ST. LOUIS, MO 63103

PICTOGRAMS

HMIS

HEALTH

FLAMMABILITY

PHYSICAL HAZARD

PERSONAL PROTECTION

Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves. Body Protection protective clothing Respiratory protection Recommended Filter type: Filter type P2 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.

Northern Michigan University
Local data

SKU #

*This local data is shared by all revisions