TEVCO INC -- NAIL POLISH  -- 8530-00F031397
<pre>=====================  Product Identification  =====================

Product ID:NAIL POLISH
MSDS Date:08/24/1987
FSC:8530
NIIN:00F031397
=== Responsible Party ===
Company Name:TEVCO INC
Address:690 MONTROSE AVE
City:SOUTH PLAINFIELD
State:NJ
ZIP:07080
Country:US
Info Phone Num:201-754-7306
Emergency Phone Num:201-754-7306
CAGE:TEVCO
=== Contractor Identification ===
Company Name:TEVCO INC
Address:690 MONTROSE AVE
City:SOUTH PLAINFIELD
State:NJ
ZIP:07080
Country:US
Phone:201-754-7306
CAGE:TEVCO

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
    CARBINOL
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 1.5-25%
Other REC Limits:400 PPM
OSHA PEL:400 PPM
ACGIH TLV:400 PPM

Ingred Name:BUTANOL, N-BUTYL ALCOHOL, PROPYL CARBINOL, BUTYL ALCOHOL
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 1-5%
Other REC Limits:300 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:C 152 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ETHANOL (ETHYL ALCOHOL), TECSOL, ALCOHOL
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: <0.1%
Other REC Limits:1900 MG/CUM
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

Ingred Name:METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: <0.1%
Other REC Limits:200 PPM
OSHA PEL:260 MG/CUM
ACGIH TLV:262 MG/CUM (SKIN)
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:CAMPHOR (CAMPHOR SYNTHETIC)
CAS:76-22-2
RTECS #:EX1225000
Fraction by Wt: 1-5%
Other REC Limits:12 PPM
OSHA PEL:2 MG/CUM
ACGIH TLV:12 MG/CUM

Ingred Name:DIBUTYL PHTHALATE, DI-N-BUTYL PHTHALATE
CAS:84-74-2
RTECS #:TI0875000
Fraction by Wt: 0.1-5%
Other REC Limits:5 MG/CUM
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Ingred Name:SUCROSE ACETATE ISOBUTYRATE
CAS:126-13-6
RTECS #:WN6550000
Fraction by Wt: 0.1-5%

Ingred Name:STYRENE/ACRYLATE/ACRYLONITRILE COPOLYMER
Fraction by Wt: 0.1-1%

Ingred Name:ACRYLATE COPOLYMERS
Fraction by Wt: 0.1-1%

Ingred Name:WET NITROCELLULOSE, NITROCELLULOSE, NITRATE CELLULOSE
CAS:9004-70-0
RTECS #:QW0975200
Fraction by Wt: 15-25%

Ingred Name:POLYESTER RESIN
Fraction by Wt: 0.1-10%

Ingred Name:BISMUTH CHLORIDE OXIDE; MEARLITE; BIJU; BISMUTH OXYCHLORIDE
CAS:7787-59-9
RTECS #:EB2700000
Fraction by Wt: 0-5%

Ingred Name:RED 6    *93-3*
CAS:1342-58-1
Fraction by Wt: 0-5%

Ingred Name:RED 7   *93-3*
CAS:1342-63-8
Fraction by Wt: 0-5%

Ingred Name:D & C RED 34 CALCIUM LAKE
Fraction by Wt: 0-5%

Ingred Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 0-5%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)

Ingred Name:FERRIC AMMONIUM FERROCYANIDE
CAS:25869-00-5
RTECS #:LJ8140000
Fraction by Wt: 0-5%

Ingred Name:IRON OXIDE, IRON OXIDE RED 1308
CAS:1332-37-2
RTECS #:NO7380000
Fraction by Wt: 0-5%

Ingred Name:YELLOW 5	*93-3*
CAS:1342-47-8
Fraction by Wt: 0-10%

Ingred Name:NYLON
CAS:63428-83-1
RTECS #:RF5250000
Fraction by Wt: <0.1%

Ingred Name:FERRIC FERROCYANIDE
Fraction by Wt: 0-5%

Ingred Name:SILICA, MICA, MUSCOVITE
CAS:12001-26-2
RTECS #:VV8760000
Fraction by Wt: 0-5%
ACGIH TLV:3 MG/CUM

Ingred Name:TOLUENE
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 25-30%
Other REC Limits:375 MG/CUM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:BUTYL ACETATE (N-BUTYL ACETATE)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 35-30%
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ETHYL ACETATE
CAS:141-78-6
RTECS #:AH5425000
Fraction by Wt: 1-5%
Other REC Limits:400 PPM
OSHA PEL:1400 MG/CUM
ACGIH TLV:1400 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE IRRITATION. INHALATION: LOSS OF
    CONSCIOUSNESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA & VOMITING.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN AS NEEDED.
    OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:25C
Extinguishing Media:WATER, CO2, DRY CHEMICAL OR ORDINARY FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES. COVER W/INERT
    ABSORBENT MATERIAL & REMOVE TO DISPOSAL CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. KEEP
    CONTAINER CLOSED. KEEP AWAY FROM EXCESSIVE HEAT & SPARKS.
Other Precautions:AVOID BREATHING VAPORS OR SKIN CONTACT. ALL PERMANENT
    & PORTABLE EQUIPMENT SHOULD BE PROPERLY GROUNDED TO ELIMINATE THE
    ACCUMULATION OF STATIC ELECTRICITY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SUPPLIED AIR RESPIRATOR, SELF-CONTAINED OR
    AIR-LINE IN HIGH CONCENTRATIONS
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES W/SHIELDS
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Density:1
Spec Gravity:0.96-1.008
Evaporation Rate &amp; Reference:(BU AC = 1): 1
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS LIQUID W/ESTERS ODOR
Percent Volatiles by Volume:60-70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS-ALKALIES & PEROXIDES
Stability Condition to Avoid:HEAT & FIRE
Hazardous Decomposition Products:NITROGEN OXIDES, CO & CO2

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.