J T BAKER INC -- ANISOLE, B469 -- 6810-00N058929
=====================  Product Identification  =====================

Product ID:ANISOLE, B469
MSDS Date:05/01/1989
FSC:6810
NIIN:00N058929
=== Responsible Party ===
Company Name:J T BAKER INC
Address:222 RED SCHOOL LN
City:PHILLIPSBURG
State:NJ
ZIP:08865
Country:US
Info Phone Num:800-582-2537
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:DO803
=== Contractor Identification ===
Company Name:J T BAKER INC
Address:222 RED SCHOOL LANE
City:PHILLIPSBURG
State:NJ
ZIP:08865
Country:US
Phone:1-800-582-2537
CAGE:DO803
Company Name:MALLINCKRODT BAKER,  INC.
Address:222 RED SCHOOL LANE
Box:City:PHILLIPSBURG
State:NJ
ZIP:08865
Country:US
Phone:800-582-2537
CAGE:70829

=============  Composition/Information on Ingredients  =============

Ingred Name:PHENOL (SARA 302/313) (CERCLA)
CAS:108-95-2
RTECS #:SJ3327000
Fraction by Wt: 0.2%
OSHA PEL:5 PPM, S
ACGIH TLV:5 PPM, S
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: COUGHING, CHEST PAIN,
    IRRITATION OF NOSE AND THROAT. SKIN/EYES: IRRITATION. CHRONIC: NONE
    IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.

=======================  First Aid Measures  =======================

First Aid:INGEST: IF SWALLOWED AND THE PERSON IS CONSCIOUS, IMMEDIATELY
    GIVE LARGE AMOUNTS OF WATER. GET MEDICAL ATTENTION. INHAL: IF
    INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
    RESPIRATION.  IF BREATHING IS DIFFICULT, GIVE OXYGEN. SKIN: IN CASE
    OF CONTACT, FLUSH SKIN WITH WATER. EYES: IN CASE OF CONTACT,
    IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:125F,52C
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
    (WATER MAY BE INEFFECTIVE.)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . MOVE CONTRS FROM FIRE AREA IF IT CAN BE DONE W/OUT RISK. USE
    WATER TO KEEP FIRE-EXPOSED CONTRS COOL.
Unusual Fire/Explosion Hazard:NONE IDENTIFIED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR SUITABLE PROT CLTHG. SHUT OFF IGNIT
    SOURCES; NO FLARES, SMKNG/FLAMES IN AREA. STOP LEAK IF YOU CAN DO
    SO W/OUT RISK. USE WATER SPRAY TO REDUCE VAPS. TAKE UP W/SAND/OTHER
    NON-COMBUST ABSORB MATL &  PLACE INTO CONTR FOR DISP. FLUSH AREA
    W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
    IN A COOL, DRY, WELL-VENTILATED, FLAMMABLE LIQUID STORAGE AREA OR
    CABINET.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED WHERE ADEQ VENT CNDTNS EXIST. IF
    AIRBORNE CONC IS HIGH, A NIOSH/MSHA APPROVED CHEM CARTRIDGE RESP
    W/ORG VAP CARTRIDGE IS RECOM. IF CONC EXCEEDS CAPACITY OF CARTRIDGE
    RESP, A NIOSH/MSHA A PPROVED SCBA IS ADVISED.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
    VAPOR AND MIST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:UNIFORM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:309F,154C
Melt/Freeze Pt:M.P/F.P Text:-34F,-37C
Vapor Pres:42.2
Vapor Density:3.72
Spec Gravity:1.00 (H*2O=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:COLORLESS LIQUID, WITH AROMATIC ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, FLAME, OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:NONE IDENTIFIED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.