CR LAURENCE CO INC -- CRL10 PLASTIC CLEANER AND POLISH  -- 7930-00N067132
<pre>=====================  Product Identification  =====================

Product ID:CRL10 PLASTIC CLEANER AND POLISH
MSDS Date:10/19/1992
FSC:7930
NIIN:00N067132
=== Responsible Party ===
Company Name:CR LAURENCE CO INC
Address:2503 E VERNON AVE
City:LOS ANGELES
State:CA
ZIP:90058
Country:US
Info Phone Num:213-588-1281
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:JO220
=== Contractor Identification ===
Company Name:C R LAURENCE CO INC
Address:2503 E VERNON AVE
Box:City:LOS ANGELES
State:CA
ZIP:90058
Country:US
Phone:213-588-1281
CAGE:4M493
Company Name:CR LAURENCE CO INC
Address:2503 E VERNON AVE
Box:City:LOS ANGELES
State:CA
ZIP:90058
Country:US
Phone:213-588-1281
CAGE:JO220

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENE; (ALIPHATIC HYDROCARBON)
CAS:8008-20-6
RTECS #:OA5500000
Fraction by Wt: 20-50%
OSHA PEL:500 PPM (MFR)
ACGIH TLV:1000 PPM (MFR)

Ingred Name:SILICA GEL; (DIATOMACEOUS EARTH)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 9-21%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:BLENDED OIL
Fraction by Wt: 4-9%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SODIUM CARBONATE (2:1); (SODIUM CARBONATE)
CAS:497-19-8
RTECS #:VZ4050000
Fraction by Wt: 0-4%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE CONTACT:MAY CAUSE IRRITATION
    OR REDNESS. SKIN CONTACT:MAY CAUSE DERMATITIS. INGESTION:MAY CAUSE
    IRRITATION TO DIGESTIVE TRACT. CHRONIC:PROLONGED OR INTENTIONAL
    EXPOSURE TO HIGH CONCENTRATION S MAY CAUSE IRRITATION TO SKIN,
    DIGESTIVE OR BREATHING TRACTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. CONSULT MD.
    SKIN:WASH AFFECTED AREA W/SOAP & WATER. WASH CONTAMINATED CLOTHING
    BEF ORE RE-USE. INGEST:DO NOT INDUCE VOMITING. CONSULT MD
    IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:200F,93C
Extinguishing Media:DRY CHEMICAL, WATER, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN & ABSORB W/DISPOSABLE RAGS OR WIPES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM EXTREME HEAT. KEEP
    CONTAINERS IN UPRIGHT POSITION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NONE REQUIRED FOR NORMAL USE.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:CONTACT LENS WEARERS TAKE PRECAUTIONS TO AVOID
    CONTAMINATION BY REMOVING ALL PRODUCT FROM HANDS BEFORE REMOVING
    LENSES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:200F,93C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1
Solubility in Water:SOLUBLE
Appearance and Odor:THICK YELLOW-GREEN LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS & ACIDS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SANITARY LANDFILL FOR ABSORBENT MATERIALS
    SUBJECT TO FEDERAL, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.