SIGMA CHEMICAL COMPANY -- POLYVINYLPYRROLIDONE AV MOL WT 10,000, P287 -- 6810-00N020417
===================== Product Identification ===================== Product ID:POLYVINYLPYRROLIDONE AV MOL WT 10,000, P287 MSDS Date:01/29/1990 FSC:6810 NIIN:00N020417 === Responsible Party === Company Name:SIGMA CHEMICAL COMPANY Box:14508 City:ST. LOUIS State:MO ZIP:63178 Country:US Info Phone Num:800-325-3010; 314-771-5750 Emergency Phone Num:314-771-5765 CAGE:21076 === Contractor Identification === Company Name:SIGMA CHEMICAL COMPANY Address:3050 SPRUCE ST Box:14508 City:ST LOUIS State:MO ZIP:63178 Country:US Phone:314-771-5765 CAGE:21076 ============= Composition/Information on Ingredients ============= Ingred Name:POLY(1-VINYL-2-PYRROLIDINONE) HUEPER'S POLYMER NO.1; (POLYVINYLPYRROLIDONE) CAS:9003-39-8 RTECS #:TR8370000 ===================== Hazards Identification ===================== LD50 LC50 Mixture:LD50:ORAL(RAT)100 GM/KG. Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED. MAY BE HARMFUL IF INHALED OR ABSORBED THROUGH SKIN. MAY CAUSE EYE OR SKIN IRRITATION. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES:IMMED FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. SKIN:FLUSH WITH WATER. INHAL:REMOVE TO FRESH AIR. CALL MD. INGEST:IMMED CALL MD . ===================== Fire Fighting Measures ===================== Extinguishing Media:WATER SPRAY. CO2, DRY CHEMICAL POWDER, ALCOHOL OR POLYMER FOAM. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS. ================== Accidental Release Measures ================== Spill Release Procedures:SWEEP UP, PLACE IN BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT BREATHE DUST. AVOID CONTACT W/EYES, SKIN & CLOTHING. AVOID PROLONGED/REPEATED EXPOSURE. KEEP TIGHTLY CLOSED. STORE IN COOL DRY PLACE. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR. Ventilation:MECHANICAL EXHAUST REQUIRED. Protective Gloves:CHEMICAL-RESISTANT GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:OTHER PROTECTIVE CLOTHING. Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:N1 Appearance and Odor:OFF-WHITE TO YELLOW POWDER ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE CO, CO2 & NITROGEN OXIDES. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISSOLVE/MIX MATERIAL WITH COMBUSTIBLE SOLVENT & BURN IN CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER. OBSERVE ALL FEDERAL, STATE & LOCAL LAWS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.