SIGMA CHEMICAL CO -- BUTYRIC ANHYDRIDE (C4:0), B2765 -- 6550-00N022376
=====================  Product Identification  =====================

Product ID:BUTYRIC ANHYDRIDE (C4:0), B2765
MSDS Date:10/25/1988
FSC:6550
NIIN:00N022376
=== Responsible Party ===
Company Name:SIGMA CHEMICAL CO
Box:14508
City:ST LOUIS
State:MO
ZIP:63178
Country:US
Info Phone Num:800-325-8070
Emergency Phone Num:314-771-5765
CAGE:21076
=== Contractor Identification ===
Company Name:SIGMA CHEMICAL COMPANY
Address:3050 SPRUCE ST
Box:14508
City:ST LOUIS
State:MO
ZIP:63178
Country:US
Phone:314-771-5765
CAGE:21076

=============  Composition/Information on Ingredients  =============

Ingred Name:BUTYRIC ANHYDRIDE
CAS:106-31-0
RTECS #:ET7090000

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50:(ORAL RAT) 8790 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HARMFUL IF SWALLOWED, INHALED OR
    ABSORBED THROUGH SKIN. MATERIAL IS EXTREMELY DESTRUCTIVE TO TISSUE
    OF THE MUCOUS MEMBRANES & UPPER RESPIRATORY TRACT, EYES & SKIN.
    INHALATION MAY BE FATAL AS A R ESULT OF SPASM, INFLAMMATION & EDEMA
    OFTHE LARYNX & BRONCHI, CHEMICAL PNEUMONITIS & PULMONARY (SEE EFTS
    OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:EDEMA. SYMPTOMS OF EXPOSURE MAY
    INCLUDE BURNING SENSATION, COUGHING, WHEEZING, LARYNGITIS,
    SHORTNESS OF BREATH, HEADACHE, NAUSEA & VOMITING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE/SKIN:IN CASE OF CONTACT, IMMED FLUSH EYES OR SKIN
    W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINS WHILE REMOVING
    CONTAMD CLOTHING & SHOES. ASSURE ADEQ FLUSHING OF THE EYES BY
    SEPARATING THE EYELID S W/FINGERS. WASH CONTAMD CLOTHING BEFORE
    REUSE. INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
    RESPIRATION. IF BREATHING IS DIFFICULT, GIVE O*2. CALL MD.
    INGEST:CALL MD IMMED .

=====================  Fire Fighting Measures  =====================

Flash Point:190F,88C
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER,
    ALCOHOL OR POLYMER FOAM.
Fire Fighting Procedures:COMBUSTIBLE. WEAR NIOSH/MSHA APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AREA. WEAR SCBA, RUBBER BOOTS & HEAVY
    RUBBER GLOVES. ABSORB ON SAND OR VERMICULITE & PLACE IN CLOSED
    CONTAINERS FOR DISPOSAL. VENTILATE AREA & WASH SPILL SITE AFTER
    MATERIAL PICKUP IS COMPLET E.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. MOISTURE
    SENSITIVE. KEEP AWAY FROM HEAT & OPEN FLAME. KEEP TIGHTLY CLOSED.
Other Precautions:CORROSIVE. STENCH. AVOID PROLONGED OR REPEATED
    EXPOSURE. DO NOT GET IN EYES, ON SKIN OR ON CLOTHING. DO NOT
    BREATHE VAPOR.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING, SAFETY SHOWER & EYE
    BATH.
Work Hygienic Practices:WASH THOROUGHLY AFFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:388F,198C
Melt/Freeze Pt:M.P/F.P Text:-87F,-66C
Spec Gravity:0.967
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

STRONG OXIDIZING AGENTS, ACIDS, BASES, REDUCING AGENTS OR ALCOHOLS.
Stability Condition to Avoid:MAY DECOMPOSE ON EXPOSURE TO MOIST AIR OR
    WATER.
Hazardous Decomposition Products:TOXIC FUMES OF CARBON MONOXIDE &
    CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS COMBUSTIBLE MATERIAL MAY BE BURNED IN A
    CHEMICAL INCINERATOR EQUIPPED W/AN AFTERBURNER & SCRUBBER. OBSERVE
    ALL FEDERAL, STATE & LOCAL LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.