J L B INTERNATIONAL -- CIDE-KICK II -- 6840-01-356-8896
=====================  Product Identification  =====================

Product ID:CIDE-KICK II
MSDS Date:09/01/1989
FSC:6840
NIIN:01-356-8896
=== Responsible Party ===
Company Name:J L B INTERNATIONAL
Box:6006
City:VERO BEACH
State:FL
ZIP:32961-6006
Country:US
Info Phone Num:800-228-1833/ 407-562-0555
Emergency Phone Num:800-228-1833/ 407-562-0555
CAGE:0JWU6
=== Contractor Identification ===
Company Name:J L B INTERNATIONAL
Box:6006
City:VERO BEACH
State:FL
ZIP:32961-6006
Country:US
Phone:800-228-1833/ 407-562-0555
CAGE:0JWU6

=============  Composition/Information on Ingredients  =============

Ingred Name:NON HAZARDOUS INGREDIENT
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE-SEVERLY IRRITATING. SKIN-LOCAL
    IRRITATION. INHALATION-NOT HARMFUL.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:SKIN-DRYING OF HANDS. INHALATION-CAUSES DRYNESS
    IN THROAT. INGESTION-VOMITING, NAUSEA, DIARRHEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER STREAM FOR 15 MINUTES, GET MEDICAL
    ATTENTION. SKIN: WASH WITH SOAP AND WATER. REMOVE CONTAMINATED
    CLOTHING. INHALATION: REMOVE TO FRESH AIR. INGESTION: DO NOT INDUCE
    VOMITING. G ET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:150F,66C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:COMBUSTIBLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP WITH WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID GETTING ON SKIN OR IN EYES. NO
    SPECIAL STORAGE REQUIREMENTS.
Other Precautions:AVOID FREQUENT OR PROLONGED SKIN CONTACT. NEVER USE
    WELDING OR CUTTING TORCH ON DRUM (EVEN WHEN EMPTY).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE
Ventilation:WELL VENTILATED AREA.
Protective Gloves:YES
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:APRON, EYE WASH AND SAFETY SHOWER AVAILABLE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
    EATING, DRINKING OR SMOKING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:B.P. Text:123F,51C
Vapor Pres:<3
Vapor Density:4.7
Spec Gravity:0.87
Evaporation Rate & Reference:<1
Solubility in Water:EMULSIFIABLE
Appearance and Odor:COLORLESS LIQUID, PINE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:CHECK LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.