BECTON-DICKINSON MICROBIOLOGY SYS INC (FORMER BBL) -- 0673819 96349 PSEUDOMONAS ISOLATION AGAR  -- 6505-00F040387
<pre>=====================  Product Identification  =====================

Product ID:0673819 96349 PSEUDOMONAS ISOLATION AGAR
MSDS Date:09/20/1994
FSC:6505
NIIN:00F040387
=== Responsible Party ===
Company Name:BECTON-DICKINSON MICROBIOLOGY SYS INC (FORMER BBL)
Address:250 SCHILLING CIRCLE
Box:243
City:COCKEYSVILLE
State:MD
ZIP:21030-5000
Country:US
Info Phone Num:301-771-0100/301-584-7169
Emergency Phone Num:301-771-0100/301-584-7169
CAGE:05545
=== Contractor Identification ===
Company Name:BECTON DICKINSON AND CO MICROBIOLOGY SYSTEMS DIV
Address:250 SCHILLING CIRCLE
Box:City:HUNT VALLEY
State:MD
ZIP:21030-1103
Country:US
Phone:410-771-0101
CAGE:05545
Company Name:CURTIN MATHESON SCIENTIFIC INC
Address:9999 VETERANS MEMORIAL DR
Box:1546
City:HOUSTON
State:TX
ZIP:77038-2499
Country:US
Phone:713-820-9898
CAGE:15481

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INDIVIDUALS W/KNOWN/SUSPECTED
    ALLERGIES SHOULD ADVISE PHYSICIAN OF INCIDENT THAT MAY HAVE
    RESULTED IN EXPOSURE TO ANTIBIOTIC MEDIA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INDIVIDUALS W/KNOWN/SUSPECTED ALLERGIES SHOULD
    ADVISE PHYSICIAN OF INCIDENT THAT MAY HAVE RESULTED IN EXPOSURE TO
    ANTIBIOTIC MEDIA.
Medical Cond Aggravated by Exposure:KNOWN/SUSPECTED ALLERGIES TO
    PRODUCT

=======================  First Aid Measures  =======================

First Aid:OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER SPRAY.
Fire Fighting Procedures:PRODUCT WON'T BURN. IF INVOLVED IN A FIRE
    SITUATION, EXTINGUISHING MEDIA FOR SURROUNDING MATERIAL SHOULD BE
    APPROPRIATE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE PAPER TOWELS TO PICK UP GELLED MATERIAL.
    WASH AREA W/SOAP & WATER AFTER CLEANUP IS COMPLETE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:OBSERVE ASEPTIC TECHNIQUES &
    ESTABLISHED PRECAUTIONS AGAINST MICROBIOLOGICAL HAZARDS THROUGHOUT
    ALL PROCEDURES.
Other Precautions:READ & FOLLOW DIRECTIONS FOR USE THOROUGHLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED UNDER NORMAL PRODUCT USAGE.
Ventilation:NONE REQUIRED UNDER NORMAL PRODUCT USAGE.
Protective Gloves:LATEX
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE REQUIRED UNDER NORMAL PRODUCT USAGE.
Work Hygienic Practices:GOOD PERSONAL HYGIENE SHOULD BE PRACTICED.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Appearance and Odor:GELLED MEDIA OF VARYING COLORS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:AFTER USE, PREPARED PLATES/SPECIMEN
    CONTAINERS/OTHER CONTAMINATED MATERIALS MUST BE STERILIZED BY
    AUTOCLAVING. DISPOSE IAW/LOCAL STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.