ALDRICH CHEMICAL CO -- 3-BROMOPHENOL, 98%, 10107-9  -- 6810-00N014400
<pre>=====================  Product Identification  =====================

Product ID:3-BROMOPHENOL, 98%, 10107-9
MSDS Date:05/02/1988
FSC:6810
NIIN:00N014400
=== Responsible Party ===
Company Name:ALDRICH CHEMICAL CO
Box:355
City:MILWAUKEE
State:WI
ZIP:53201
Country:US
Info Phone Num:414-273-3850
CAGE:60928
=== Contractor Identification ===
Company Name:ALDRICH CHEMICAL CO INC
Address:1001 WEST ST PAUL AVE
Box:355
City:MILWAUKEE
State:WI
ZIP:53233
Country:US
Phone:414-273-3850
CAGE:60928

=============  Composition/Information on Ingredients  =============

Ingred Name:3-BROMOPHENOL, 98%
CAS:591-20-8
Fraction by Wt: 98%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HARMFUL IF INGESTED, INHALED OR
    ABSORBED THROUGH SKIN. CAUSES EYE & SKIN IRRIT. MATERIAL IS IRRIT
    TO MUCOUS MEMBRANES & UPPER RESP TRACT. DEPENDING ON INTENSITY &
    DURATION OF EXPOSURE, EFFECTS M AY VARY FROM MILD IRRIT TO SEVERE
    DESTRUCTION OF TISSUE. CHRONIC:DAMAGE TO EYES. SEVERE IRRITATION OR
    BURNS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES:IMMEDIATELY FLUSH W/COPIOUS AMTS OF WATER FOR AT LEAST
    15 MINUTES. ASSURE ADEQ FLUSHING BY SEPARATING LIDS W/FINGERS.
    SKIN:IMMEDIATELY FLUSH W/COPIOUS AMTS OF WATER FOR 15 MINUTES WHILE
    REMOVING  CONTAM CLTHG/SHOES. WASH CONTAM CLTHG BEFORE REUSE.
    INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP),
    CALL MD. INGEST:CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>230F,>110C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL POWDER, ALCOHOL OR
    POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT TO PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS &
    HEAVY RUBBER GLOVES. COVER W/DRY LIME OR SODA ASH, PICK UP, KEEP IN
    CLOSED CONTAINER & HOLD FOR WASTE DISPOSAL. VENTILATE AREA & WASH
    SPILL SITE AFTER MAT ERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP TIGHTLY
    CLOSED. AVOID CONTACT WITH EYES, SKIN AND CLOTHING. DO NOT BREATHE
    DUST.
Other Precautions:IRRITANT. HARMFUL SOLID.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING. SAFETY SHOWER AND EYE
    BATH.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
    EATING, DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:T6
Boiling Pt:B.P. Text:457F,236C
Melt/Freeze Pt:M.P/F.P Text:86.0F,30.0C
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACID CHLORIDES, ACID ANHYDRIDES, OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF:CO, CO*2, HYDROGEN
    BROMIDE GAS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISSOLVE OR MIX MATERIAL W/COMBUSTIBLE SOLVENT
    AND BURN IN CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER AND
    SCRUBBER. DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.