ALDRICH CHEMICAL COMPANY -- 1-BROMOHEPTANE, 99%, B6757-0 -- 6810-00N014395
===================== Product Identification ===================== Product ID:1-BROMOHEPTANE, 99%, B6757-0 MSDS Date:05/06/1988 FSC:6810 NIIN:00N014395 === Responsible Party === Company Name:ALDRICH CHEMICAL COMPANY Box:355 City:MILWAUKEE State:WI ZIP:53201 Country:US Info Phone Num:414-273-3850 CAGE:60928 === Contractor Identification === Company Name:ALDRICH CHEMICAL CO INC Address:1001 WEST ST PAUL AVE Box:355 City:MILWAUKEE State:WI ZIP:53233 Country:US Phone:414-273-3850 CAGE:60928 ============= Composition/Information on Ingredients ============= Ingred Name:HEPTANE,1-BROMO- (1-BROMOHEPTANE, 99%) CAS:629-04-9 RTECS #:MI8100000 Fraction by Wt: 99% ===================== Hazards Identification ===================== LD50 LC50 Mixture:LD50: (IPR,MAM) 2440 MG/KG Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: MAY BE HARMFUL BY INHALATION OR INGESTION. CAUSES EYE AND SKIN IRRITATION. MATERIAL IS IRRITATING TO MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES & SKIN: IMMEDIATELY FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. WASH CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE TO FRESH AIR . IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN. CALL MD. INGEST: CALL MD IMMEDIATELY . ===================== Fire Fighting Measures ===================== Flash Point Method:CC Flash Point:141F,61C Extinguishing Media:WATER SPRAY. CO*2, DRY CHEMICAL POWDER, ALCOHOL AND POLYMER FOAM. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND PROTECTIVE CLOTHING TO PREVENT CONTACT WITH SKIN AND EYES. COMBUSTIBLE. Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS. ================== Accidental Release Measures ================== Spill Release Procedures:EVACUATE AREA. WEAR NIOSH/MSHA APPROVED SCBA, RUBBER BOOTS AND HEAVY RUBBER GLOVES. ABSORB ON SAND OR VERMICULITE AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. VENTILATE AREA AND WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT BREATHE VAPOR. KEEP CONTAINER CLOSED. KEEP AWAY FROM HEAT AND OPEN FLAME. STORE IN A COOL DRY PLACE. Other Precautions:AVOID CONTACT WITH EYES, SKIN AND CLOTHING. AVOID PROLONGED OR REPEATED EXPOSURE. IRRITANT. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR. Ventilation:MECHANICAL EXHAUST REQUIRED. Protective Gloves:CHEMICAL RESISTANT GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:PROTECTIVE CLOTHING, SAFETY SHOWER AND EYE BATH. Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING, DRINKING, SMOKING OR USING SANITARY FACILITIES . Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:F4 Boiling Pt:B.P. Text:356F,180C Melt/Freeze Pt:M.P/F.P Text:-72F,-58C Spec Gravity:1.140 Appearance and Odor:NONE SPECIFIED BY MANUFACTURER. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS & STRONG BASES. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:TOXIC FUMES OF: CO, CO*2 & HYDROGEN BROMIDE GAS. ==================== Disposal Considerations ==================== Waste Disposal Methods:THIS COMBUSTIBLE MATERIAL MAY BE BURNED IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND SCRUBBER. DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL LAWS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.