STONER INC -- K206 SILICONE MOLD RELEASE  -- 6850-00F038084
<pre>=====================  Product Identification  =====================

Product ID:K206 SILICONE MOLD RELEASE
MSDS Date:12/01/1992
FSC:6850
NIIN:00F038084
=== Responsible Party ===
Company Name:STONER INC
Address:1070 ROBERT FULTON HWY
Box:65
City:QUARRYVILLE
State:PA
ZIP:17566-9407
Country:US
Info Phone Num:800-227-5538/717-786-7355
Emergency Phone Num:717-786-7355/800-227-5538
CAGE:5Y425
=== Contractor Identification ===
Company Name:STONER INCORPORATED
Address:1070 ROBERT FULTON HWY
Box:City:QUARRYVILLE
State:PA
ZIP:15766
Country:US
Phone:800-227-5538
CAGE:5Y425

=============  Composition/Information on Ingredients  =============

Ingred Name:HALOGENATED HYDROCARBON/ETHER BLEND

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HARMFUL, MAY CAUSE
    TEMPORARY NERVOUS SYSTEM DEPRESSION W/ANESTHETIC EFFECTS. HIGHER
    EXPOSURES MAY CAUSE TEMPORARY ALTERATION OF THE HEART'S ELECTRICAL
    ACTIVITY. GROSS OVEREXPOSURE MAY BE F ATAL. LIQUID CONTACT MAY
    CAUSE FREEZINGOF THE SKIN. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DIZZINESS, HEADACHE, INCOORDINATION, LOSS OF
    CONSCIOUSNESS, FREEZING OF SKIN, IRRITATION, TEARING, BLURRING OF
    VISION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: IMMEDIATELY REMOVE TO FRESH AIR. IF NOT
    BREATHING, GIVE CPR/OXYGEN IF NECESSARY. SKIN: WASH W/SOAP & WATER.
    FLUSH W/WATER AFTER EXCESSIVE CONTACT. TREAT FOR FROSTBITE IF
    NECESSARY. EYES: I MMEDIATELY FLUSH W/WATER FOR 15 MINS. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE
Lower Limits:4.2
Upper Limits:20.2
Extinguishing Media:CO2, DRY CHEMICAL, FOAM SPRAY
Fire Fighting Procedures:KEEP CONTAINERS COOL W/SPRAY. DON'T PUT OUT
    FIRE UNLESS LEAK CAN BE STOPPED IMMEDIATELY. USE SELF CONTAINED
    BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS CONFINED IN A POORLY VENTILATED
    AREA MAY BE IGNITED BY SPARKS/FLAMES/IGNITION SOURCES. CONTAINERS
    MAY RUPTURE/EXPLODE UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID VAPORS. EVACUATE AREA UNTIL GAS HAS
    DISPERSED. LARGE: WEAR SELF CONTAINED BREATHING APPARATUS.
    ELIMINATE ALL SOURCES OF IGNITION IN THE VICINITY OF LEAK/RELEASED
    VAPORS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTENTS UNDER PRESSURE. STORE IN A
    CLEAN, DRY AREA. DON'T HEAT >125.F. STORE AWAY FROM IGNITION
    SOURCES. USE W/ADEQUATE VENTILATION.
Other Precautions:PROTECT CONTAINER AGAINST PHYSICAL DAMAGE. DON'T
    REMOVE/DEFACE LABEL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE GENERALLY REQUIRED EXCEPT FOR NORMALLY
    VENTED SITUATIONS.
Ventilation:LOCAL EXHAUST WHEN LARGE AMOUNTS ARE RELEASED. MECHANICAL
    SHOULD BE USED IN LOW PLACES TO MAINTAIN EXPOSURE <TLV.
Protective Gloves:LINED RUBBER GLOVES
Eye Protection:CHEMICAL SAFETY GLASSES
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:-13F
Vapor Pres:60 PSIG
Vapor Density:>1
Spec Gravity:0.81
Evaporation Rate &amp; Reference:(BU AC=1): >1
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, COLORLESS W/SLIGHT ETHEREAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ALKALI/ALKALINE EARTH METALS-POWDERED ZINC, BERYLLIUM
Stability Condition to Avoid:IGNITION SOURCES, OPEN FLAME, GLOWING
    METAL SURFACES, STATIC DISCHARGES, SPARKS, TEMPS >125F
Hazardous Decomposition Products:HYDROCHLORIC & HYDROFLUORIC ACIDS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL REGULATINS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.