ENVIRONMENTAL TECHNOLOGY,INC -- ENVIROTEX LITE HARDENER  -- 8010-00N003866
<pre>=====================  Product Identification  =====================

Product ID:ENVIROTEX LITE HARDENER
MSDS Date:01/01/1985
FSC:8010
NIIN:00N003866
=== Responsible Party ===
Company Name:ENVIRONMENTAL TECHNOLOGY,INC
Emergency Phone Num:707-443-9323
CAGE:3G850
=== Contractor Identification ===
Company Name:ENVIRONMENTAL TECHNOLOGY,INC
CAGE:3G850

=============  Composition/Information on Ingredients  =============

Ingred Name:MODIFIED POLYAMINE

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE/SKIN: IRRITATION.SENSITIZATION

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MEDICAL ATTN. SKIN: WASH
    WITH SOAP & WATER. INHALATION: REMOVE TO FRESH AIR,GET MEDICAL
    ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:>200F/93C (TOC)
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER SPRAY TO COOL
    EXPOSED CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:BROADCAST VERMICULITE OR OTHER SWEEPING
    COMPOUND OVER AREA. SWEEP OR SCOOP UP & PUT IN DISPOSAL CONTAINER.
    FLUSH AREA WITH PLENTY OF WATER,PREVENT WASHINGS FROM ENTERING
    WATERWAYS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:GOOD HOUSEKEEPING PROCEDURES

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
    EXPOSURE OF CONCERN
Ventilation:MECHANICAL
Protective Gloves:RUBBER/POLYETHY
Eye Protection:SAFETY GLASSES
Other Protective Equipment:CLEAN LONG SLEEVE/LEG CLOTH,APRON,SAFETY
    SHOWER,EYE BATH
Supplemental Safety and Health
PART A OF A 2 PART KIT

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:0.96
Solubility in Water:SLIGHT
Appearance and Odor:TRANSPARENT STRAW COLORED LIQUID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
EPOXY RESIN UNDER UNCONTROLLED CONDITIONS
Hazardous Decomposition Products:CO,CO*2
Conditions to Avoid Polymerization:EPOXY RESIN UNDER UNCONTROLLED
    CONDITIONS

====================  Disposal Considerations  ====================

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.