ALDRICH CHEMICAL COMPANY -- CATECHOL, 99+% 13501-1 -- 6810-00N014234
=====================  Product Identification  =====================

Product ID:CATECHOL, 99+% 13501-1
MSDS Date:02/09/1989
FSC:6810
NIIN:00N014234
=== Responsible Party ===
Company Name:ALDRICH CHEMICAL COMPANY
Box:355
City:MILWAUKEE
State:WI
ZIP:53201
Country:US
Info Phone Num:414-273-3850
CAGE:60928
=== Contractor Identification ===
Company Name:ALDRICH CHEMICAL CO INC
Address:1001 WEST ST PAUL AVE
Box:355
City:MILWAUKEE
State:WI
ZIP:53233
Country:US
Phone:414-273-3850
CAGE:60928

=============  Composition/Information on Ingredients  =============

Ingred Name:CATECHOL (PYROCATECHOL)  (SARA III)
CAS:120-80-9
RTECS #:UX1050000
OSHA PEL:S, 5 PPM; 9293
ACGIH TLV:S, 5 PPM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE SUPP DATA
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF SWALLOWED, INHALED,
    OR ABSORBED THRU SKIN. MATL IS EXTREMELY DESTRUCTIVE TO TISS OF MUC
    MEMB AND UPPER RESP TRACT, EYES AND SKIN. INHAL MAY BE FATAL AS A
    RESULT OF SPASM, INFLAM AND  EDEMA OF THE LARYNX AND BRONCHI, CHEM
    PNEUM AND PULMONARY EDEMA. MAY CAUSE CONVULSIONS.
Explanation of Carcinogenicity:IARC - GP 3.
Effects of Overexposure:BURNING SENSATION, COUGHING, WHEEZING,
    LARYNGITIS, SHORTNESS OF BREATH, HEADACHE, NAUSEA AND VOMITING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES & SKIN: IMMEDIATELY FLUSH WITH COPIOUS AMOUNTS OF WATER
    FOR AT LEAST 15 MINUTES WHILE REMOVING CONTAMINATED CLOTHING AND
    SHOES. ASSURE ADEQUATE FLUSHING OF EYES BY SEPARATING LIDS WITH
    FINGERS. I NHAL: REMOVE TO FRESH AIR. IF NOT BREATHING GIVE
    ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT, GIVE OXYGEN.
    CALL MD. INGEST: CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:279F,137C
Lower Limits:1.97%
Extinguishing Media:WATER SPRAY. CO2, DRY CHEMICAL POWDER, ALCOHOL OR
    POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND PROTECTIVE
    CLOTHING TO PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR NIOSH/MSHA APPRVD SCBA, RUBBER BOOTS AND
    HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN A BAG AND HOLD FOR WASTE
    DISPOSAL. AVOID RAISING DUST. VENT AREA AND WASH SPILL SITE AFTER
    MATERIAL PICKUP IS COMP LETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT BREATHE DUST. KEEP TIGHTLY
    CLOSED. AIR AND LIGHT SENSITIVE. STORE IN A COOL DRY PLACE.
Other Precautions:DO NOT GET IN EYES, ON SKIN OR CLOTHING. AVOID
    PROLONGED OR REPEATED EXPOSURE. READILY ABSORBED THROUGH SKIN.
    CORROSIVE. TOXIC.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGGLES, FACESHLD OPTL .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH, FACESHIELD
    (8-INCH MINIMUM) & OTHER PROTECTIVE EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE AND BEFORE EATING,
    DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
LD50-LC50 MIX: LD50:(ORAL,RAT) 260 MG/KG, (ORAL,MUS) 260 MG/KG,
    (IPR,MUS) 175 MG/KG, (SCU,MUS) 247 MG/KG, (SKN,RBT) 800 MG/KG,
    (ORAL,GPG) 210 MG/KG, (ORAL,MAM) 240 MG/KG.

==================  Physical/Chemical Properties  ==================

HCC:C1
Boiling Pt:B.P. Text:473F,245C
Melt/Freeze Pt:M.P/F.P Text:219F,104C
Vapor Pres:1.0 @ 75C
Vapor Density:3.8
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACID CHLORIDES, ACID ANHYDRIDES, BASES AND OXIDIZING AGENTS.
Stability Condition to Avoid:LIGHT SENSITIVE. MAY DISCOLOR ON EXPOSURE
    TO AIR.
Hazardous Decomposition Products:TOXIC FUMES OF: CO & CO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
    SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
    AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL
    LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.