3M COMPANY -- EC-801,INDUSTRIAL SEALANT,B-1/2  -- 8030-00-841-6831
<pre>=====================  Product Identification  =====================

Product ID:EC-801,INDUSTRIAL SEALANT,B-1/2
MSDS Date:01/01/1987
FSC:8030
NIIN:00-841-6831
=== Responsible Party ===
Company Name:3M COMPANY
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company Name:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM BASE SOLVENT
Fraction by Wt: 3.0%
ACGIH TLV:UNK

Ingred Name:POLYSULFIDE RUBBER (MFR'S MSDS SHOWS THIS INGRED + NIOSH
    3,4,& 5 + SILICA PIGM.+ H*2O= 97
Fraction by Wt: UNK
ACGIH TLV:UNK

Ingred Name:PHENOLIC RESIN
Fraction by Wt: UNK
ACGIH TLV:UNK

Ingred Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: UNK
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192

Ingred Name:MAGNESIUM ACETATE(MFR'S MSDS SHOWS THIS INGRED.+ NIOSH
    2,3,& 4 + SILICA PIGM.+ H*2O = 97)
CAS:142-72-3
RTECS #:AI5600000
Fraction by Wt: UNK
ACGIH TLV:UNK

=====================  Hazards Identification  =====================

Effects of
    Overexposure:EYE:IRRIT.SKIN:DEFATTING/DERMATITIS.VAPORS:HEADACHE,NA
    USEA & VOMITING.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH WITH WATER 15 MIN,CALL PHYSICIAN.SKIN:WASH WITH
    SOAP AND WATER.INHALATION:REMOVE TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point:>100F/37C
Extinguishing Media:CO2,FOAM,DRY CHEM

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL.CLEAN UP RESIDUE AND AREA OF
    SPILL.PLACE RESIDUE IN CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID EYE CONTACT.AVOID PROLONGED
    BREATHING OF VAPOR AND PROLONG OR REPEATED SKIN CONTACT.KEEP
    CONTAINER CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Ventilation:MECHANICAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
OTHER P/N:SCOTCHSEAL 801(B2) IND SLNT;EC-801 FILLETING SLNT.3M GENERIC
    ID#:62-0801-XXXX-X.PT A OF EC-801(B1/2) TWO-PART KIT.OTHER
    INGRED:SILICA PIGMENT&WATER. QTY: 1 GL W/ACCELERATOR

==================  Physical/Chemical Properties  ==================

HCC:F4
Spec Gravity:1.36
Solubility in Water:SLIGHT
Appearance and Odor:BLACK,SULFUR ODOR
Percent Volatiles by Volume:3

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO2,SULFUR COMPOUNDS

====================  Disposal Considerations  ====================

Waste Disposal Methods:MAY BE DISPOSED OF IN A SANITARY LANDFILL
    ACCORDING TO LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.