ENVIRONMENTAL TECHNOLOGY, INC -- ENVIROTEX LITE, 2128 ML  -- 8040-00F007584
<pre>=====================  Product Identification  =====================

Product ID:ENVIROTEX LITE, 2128 ML
MSDS Date:01/16/1986
FSC:8040
NIIN:00F007584
=== Responsible Party ===
Company Name:ENVIRONMENTAL TECHNOLOGY, INC
Address:SOUTH BAY DEPOT ROAD
City:FIELDS LANDING
State:CA
ZIP:95537
Info Phone Num:(707) 443-9323
Emergency Phone Num:(707) 443-9323
CAGE:ENVIR
=== Contractor Identification ===
Company Name:ENVIRONMENTAL TECHNOLOGIES GROUP INC
Address:1400 TAYLOR AVE
City:BALTIMORE
State:MD
ZIP:21284-9840
Country:US
Phone:410-321-5200
CAGE:ENVIR

=============  Composition/Information on Ingredients  =============

Ingred Name:O-CRESYL GLYCIDYLETHER
CAS:26447-14-3
RTECS #:TZ3699000
Fraction by Wt: <20%

Ingred Name:EPICHLOROHYDRIN  (SARA III)
CAS:106-89-8
RTECS #:TX4900000
Fraction by Wt: <.01%
OSHA PEL:S, 5 PPM
ACGIH TLV:S, 2 PPM; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: CONTAINS MATERIALS THAT ARE
    SLIGHTLY TOXIC. INHALATION OF VAPOR COULD CAUSE HEADACHES, NAUSEA,
    DIZZINESS & RESPIRATORY TRACT IRRITATION. SKIN: MAY CAUSE MODERATE
    SKIN INJURY (SWELLING & RED DENING) & SENSITIZATION. EYE: MAY
    CAUSEIRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:NO SPECIFIC INFORMATION AVAILABLE. PRODUCTS
    RELATED TO EPOXY RESIN HAVE SHOWN POTENTIAL FOR CAUSING GENOTOXIC
    EFFECTS IN LABORATORY TESTS.

=======================  First Aid Measures  =======================

First Aid:EYE & SKIN: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINS.
    SEEK MEDICAL ATTENTION. INGESTION: IF APPRECIABLE QUANTITIES ARE
    SWALLOWED, INDUCE VOMITING, SEEK MEDICAL ATTENTION. INHALATION:
    REMOVE TO  FRESH AIR. RESTORE BREATHING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:>250F
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL FOAM OR CO2. TREAT AS
    A CLASS B FIRE.
Fire Fighting Procedures:WATER SHOULD BE USED TO KEEP FIRE EXPOSED
    CONTAINERS COOL. USE WATER SPRAY TO FLUSH SPILLS AWAY FROM
    EXPOSURE. WEAR SELF-CONTAINED BREATHING APPARATUS/GOGGLES.
Unusual Fire/Explosion Hazard:IF A LEAK OR SPILL HASN'T IGNITED, USE
    WATER SPRAY TO DISPERSE THE VAPORS & TO PROTECT PERSONS IN THE AREA
    OF THE FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELMINATE IGNITION SOURCES. DIKE SPILL TO
    MINIMIZE CONTAMINATION. ABSORB SPILL W/INERT MATERIAL
    (SAND/VERMICULITE/CAT LITTER, ETC.), SWEEP/SCOOP UP & PUT IN
    DISPOSAL CONTAINER. FLUSH AREA W/PLENTY OF W ATER; PREVENT WASHINGS
    FROM ENTERING WATERWAYS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT WITH SKIN. REMOVE &
    THOROUGHLY LAUNDER CONTAMINATED CLOTHING. DISCARD CONTAMINATED
    SHOES.
Other Precautions:GROUND LARGE CONTAINERS SUCH AS DRUMS, WHEN
    TRANSFERRING FROM ONE CONTAINER TO ANOTHER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE W/ADEQUATE VENTILATION. NIOSH APPROVED
    ORGANIC VAPOR OR AIR LINE RESPIRATORS SHOULD BE USED WHERE
    VENTILATION IS INADEQUATE. NIOSH APPROVED AIR RESPIRATORS WITH
    AUXILLARY ESCAPE AIR TANKS OR SCBA	SHOULD BE USED IN CONFINED
    SPACES.
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:IMPERVIOUS, DISPOSABLE PLASTIC
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:SAFETY SHOWER AND EYEWASH FACILITY.
Supplemental Safety and Health
WGT PER GAL: 9.6 LBS

==================  Physical/Chemical Properties  ==================

Vapor Density:>AIR
Evaporation Rate &amp; Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:CLEAR VISCOUS LIQUID MILD ODOR
Percent Volatiles by Volume:<1%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, AMINES, MERCAPTANS & BASES.
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL IN
    ACCORDANCE WITH FEDERAL, STATE & LOCAL REGULATIONS. U.S. EPA
    DOESN'T DEFINE THIS PRODUCT AS HAZARDOUS WASTE UNDER RCRA.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.